The Req object

The Req object is a variable used for obtaining information about a request, read its body or send a response.

It is not really an object in the object-oriented sense. It is a simple map that can be directly accessed or used when calling functions from the cowboy_req module.

The Req object is the subject of a few different chapters. In this chapter we will learn about the Req object and look at how to retrieve information about the request.

Direct access

The Req map contains a number of fields which are documented and can be accessed directly. They are the fields that have a direct mapping to HTTP: the request method; the HTTP version used; the effective URI components scheme, host, port, path and qs; the request headers; the connection peer address and port; and the TLS certificate cert when applicable.

Note that the version field can be used to determine whether a connection is using HTTP/2.

To access a field, you can simply match in the function head. The following example sends a simple "Hello world!" response when the method is GET, and a 405 error otherwise.

init(Req0=#{method := <<"GET">>}, State) ->
    Req = cowboy_req:reply(200, #{
        <<"content-type">> => <<"text/plain">>
    }, <<"Hello world!">>, Req0),
    {ok, Req, State};
init(Req0, State) ->
    Req = cowboy_req:reply(405, #{
        <<"allow">> => <<"GET">>
    }, Req0),
    {ok, Req, State}.

Any other field is internal and should not be accessed. They may change in future releases, including maintenance releases, without notice.

Modifying the Req object, while allowed, is not recommended unless strictly necessary. If adding new fields, make sure to namespace the field names so that no conflict can occur with future Cowboy updates or third party projects.

Introduction to the cowboy_req interface

Functions in the cowboy_req module provide access to the request information but also various operations that are common when dealing with HTTP requests.

All the functions that begin with a verb indicate an action. Other functions simply return the corresponding value (sometimes that value does need to be built, but the cost of the operation is equivalent to retrieving a value).

Some of the cowboy_req functions return an updated Req object. They are the read, reply, set and delete functions. While ignoring the returned Req will not cause incorrect behavior for some of them, it is highly recommended to always keep and use the last returned Req object. The manual for cowboy_req details these functions and what modifications are done to the Req object.

Some of the calls to cowboy_req have side effects. This is the case of the read and reply functions. Cowboy reads the request body or replies immediately when the function is called.

All functions will crash if something goes wrong. There is usually no need to catch these errors, Cowboy will send the appropriate 4xx or 5xx response depending on where the crash occurred.

Request method

The request method can be retrieved directly:

#{method := Method} = Req.

Or using a function:

Method = cowboy_req:method(Req).

The method is a case sensitive binary string. Standard methods include GET, HEAD, OPTIONS, PATCH, POST, PUT or DELETE.

HTTP version

The HTTP version is informational. It does not indicate that the client implements the protocol well or fully.

There is typically no need to change behavior based on the HTTP version: Cowboy already does it for you.

It can be useful in some cases, though. For example, one may want to redirect HTTP/1.1 clients to use Websocket, while HTTP/2 clients keep using HTTP/2.

The HTTP version can be retrieved directly:

#{version := Version} = Req.

Or using a function:

Version = cowboy_req:version(Req).

Cowboy defines the 'HTTP/1.0', 'HTTP/1.1' and 'HTTP/2' versions. Custom protocols can define their own values as atoms.

Effective request URI

The scheme, host, port, path and query string components of the effective request URI can all be retrieved directly:

#{
    scheme := Scheme,
    host := Host,
    port := Port,
    path := Path,
    qs := Qs
} = Req.

Or using the related functions:

Scheme = cowboy_req:scheme(Req),
Host = cowboy_req:host(Req),
Port = cowboy_req:port(Req),
Path = cowboy_req:path(Req).
Qs = cowboy_req:qs(Req).

The scheme and host are lowercased case insensitive binary strings. The port is an integer representing the port number. The path and query string are case sensitive binary strings.

Cowboy defines only the <<"http">> and <<"https">> schemes. They are chosen so that the scheme will only be <<"https">> for requests on secure HTTP/1.1 or HTTP/2 connections.

The effective request URI itself can be reconstructed with the cowboy_req:uri/1,2 function. By default, an absolute URI is returned:

%% scheme://host[:port]/path[?qs]
URI = cowboy_req:uri(Req).

Options are available to either disable or replace some or all of the components. Various URIs or URI formats can be generated this way, including the origin form:

%% /path[?qs]
URI = cowboy_req:uri(Req, #{host => undefined}).

The protocol relative form:

%% //host[:port]/path[?qs]
URI = cowboy_req:uri(Req, #{scheme => undefined}).

The absolute URI without a query string:

URI = cowboy_req:uri(Req, #{qs => undefined}).

A different host:

URI = cowboy_req:uri(Req, #{host => <<"example.org">>}).

And any other combination.

Bindings

Bindings are the host and path components that you chose to extract when defining the routes of your application. They are only available after the routing.

Cowboy provides functions to retrieve one or all bindings.

To retrieve a single value:

Value = cowboy_req:binding(userid, Req).

When attempting to retrieve a value that was not bound, undefined will be returned. A different default value can be provided:

Value = cowboy_req:binding(userid, Req, 42).

To retrieve everything that was bound:

Bindings = cowboy_req:bindings(Req).

They are returned as a map, with keys being atoms.

The Cowboy router also allows you to capture many host or path segments at once using the ... qualifier.

To retrieve the segments captured from the host name:

HostInfo = cowboy_req:host_info(Req).

And the path segments:

PathInfo = cowboy_req:path_info(Req).

Cowboy will return undefined if ... was not used in the route.

Query parameters

Cowboy provides two functions to access query parameters. You can use the first to get the entire list of parameters.

QsVals = cowboy_req:parse_qs(Req),
{_, Lang} = lists:keyfind(<<"lang">>, 1, QsVals).

Cowboy will only parse the query string, and not do any transformation. This function may therefore return duplicates, or parameter names without an associated value. The order of the list returned is undefined.

When a query string is key=1&key=2, the list returned will contain two parameters of name key.

The same is true when trying to use the PHP-style suffix []. When a query string is key[]=1&key[]=2, the list returned will contain two parameters of name key[].

When a query string is simply key, Cowboy will return the list [{<<"key">>, true}], using true to indicate that the parameter key was defined, but with no value.

The second function Cowboy provides allows you to match out only the parameters you are interested in, and at the same time do any post processing you require using constraints. This function returns a map.

#{id := ID, lang := Lang} = cowboy_req:match_qs([id, lang], Req).

Constraints can be applied automatically. The following snippet will crash when the id parameter is not an integer, or when the lang parameter is empty. At the same time, the value for id will be converted to an integer term:

QsMap = cowboy_req:match_qs([{id, int}, {lang, nonempty}], Req).

A default value may also be provided. The default will be used if the lang key is not found. It will not be used if the key is found but has an empty value.

#{lang := Lang} = cowboy_req:match_qs([{lang, [], <<"en-US">>}], Req).

If no default is provided and the value is missing, the query string is deemed invalid and the process will crash.

When the query string is key=1&key=2, the value for key will be the list [1, 2]. Parameter names do not need to include the PHP-style suffix. Constraints may be used to ensure that only one value was passed through.

Headers

Header values can be retrieved either as a binary string or parsed into a more meaningful representation.

The get the raw value:

HeaderVal = cowboy_req:header(<<"content-type">>, Req).

Cowboy expects all header names to be provided as lowercase binary strings. This is true for both requests and responses, regardless of the underlying protocol.

When the header is missing from the request, undefined will be returned. A different default can be provided:

HeaderVal = cowboy_req:header(<<"content-type">>, Req, <<"text/plain">>).

All headers can be retrieved at once, either directly:

#{headers := AllHeaders} = Req.

Or using a function:

AllHeaders = cowboy_req:headers(Req).

Cowboy provides equivalent functions to parse individual headers. There is no function to parse all headers at once.

To parse a specific header:

ParsedVal = cowboy_req:parse_header(<<"content-type">>, Req).

An exception will be thrown if it doesn't know how to parse the given header, or if the value is invalid. The list of known headers and default values can be found in the manual.

When the header is missing, undefined is returned. You can change the default value. Note that it should be the parsed value directly:

ParsedVal = cowboy_req:parse_header(<<"content-type">>, Req,
    {<<"text">>, <<"plain">>, []}).

Peer

The peer address and port number for the connection can be retrieved either directly or using a function.

To retrieve the peer directly:

#{peer := {IP, Port}} = Req.

And using a function:

{IP, Port} = cowboy_req:peer(Req).

Note that the peer corresponds to the remote end of the connection to the server, which may or may not be the client itself. It may also be a proxy or a gateway.

Cowboy 2.6 User Guide

Navigation

Version select

Like my work? Donate!

Donate to Loïc Hoguin because his work on Cowboy, Ranch, Gun and Erlang.mk is fantastic:

Recurring payment options are also available via GitHub Sponsors. These funds are used to cover the recurring expenses like food, dedicated servers or domain names.